fbpx

FAQ

plug-free-img.png

have questions ?

Frequently asked questions answered by RYB ELECTRICAL

Loose wiring is the most serious reason for flickering lights and a main cause of house fires. Shut off the light at the circuit breaker before removing the fixture to double check the wiring. If the fixture looks like it might be loose or insecure, it’s time to call an electrician

The fuse will blow or the breaker trip when either: The circuit is overloaded so that it is trying to draw too much current. There is a fault on the circuit probably creating a short (short circuit) caused possibly by the live touching neutral or earth wires, or possibly a fault on an appliance.

Reasons your AC trips the circuit breaker. If the air conditioner is the source of the tripping, it may be overheating. When an air conditioner overheats, it draws more amps (a measurement of electrical current) from the circuit. That may be pushing the circuit past the number of amps it was meant to handle

The most likely cause is a tripped breaker. This can happen when the electrical circuit is overloaded, or a defective appliance or damaged cord short-circuits the system. First, you need to unplug all the appliances in the room, since one of them likely caused the safety device to blow.

The first thing to do if a bulb seems to burn out quickly is check the fixture it’s in. Light fixtures can wear out over time and develop wiring problems that cause the bulbs to fail early. If bulbs are repeatedly burning out quickly in the same light fixture, it’s probably the fixture.
 
In the US, arc faults are one of the leading causes for residential electrical fires. … AFCIs are devices designed to protect against fires caused by arcing faults in the home electrical wiring. The AFCI circuitry continuously monitors the current and discriminates between normal and unwanted arcing conditions.
 

The applications of DOL starters are primarily motors where a high inrush current does not cause excessive voltage drop in the supply circuit (or where this high voltage drop is acceptable). Direct on line starters are commonly used to start small water pumps, conveyor belts, fans, and compressors

feature-2-free-img.jpg

Request A Quote Today

...

Reach Us

Location :

36-B W 1st Ave, Miller, SD 57362, USA

Email :

info@domain.com

Phone :

+1-800-123-4567

+1 123-456-7890

RYB ELECTRICAL

RYB ELECTRICA has been caring entire electrical services for 15+ years with fame, prestige and experience providing commercial, industrial and residential electrical services