LM2596 DC-DC Buck Converter 4-40V to 1.25-37V Step-Down Regulator Power Module Volt Stabilizer with LED Voltmeter Display
Self-calibration, adopt LM2596S decompression chip, output stably. The continuous and adjustable output range is 1.25-37 V. Please note that the input voltage should be higher than the output voltage at least 1.5
The rated output power is 20w, please add cooling module if it is above 15w.
The rated output current is 3A, it is recommended to use within 2A, or please add cooling module.
Once calibrate the voltmeter, you can get the accurate voltage value on the whole voltage range.
The digital display is convenient for controlling of the input and output power, and cooling fin and copper cylinder holder make sure the usage of reverse voltage protection and short-circuit protection modules being more safe. The input and output terminal blocks can be used without electric soldering iron, in the meantime retaining the soldering point. Switch the digital tube light or dark, the input and output voltage power, and keep the final setting. Even if the digital tube is power on after outage, it will also keeps the state of the last switching.
- Input Voltage 4.0 ~ 40V. (Input voltage must be higher than the output voltage of 1.5v or more)
- Adjustable output voltage range of 1.25V ~ 37V continuously adjustable. (Input voltage must be higher than the output voltage of 1.5V)
- Output current 3A, recommendations within 2.0A use, high current needed to enhance heat dissipation.
- Output power 20W, 15W, please enhance heat dissipation over.
- High conversion efficiency, on average 88% (efficiency and the input and output voltage, current, pressure related)
- With reverse polarity protection, reverse polarity does not burn
- Size 6.1 * 3.4 * 12cm (L * W * H)
LM2596 DC-DC Step Down Module with Digital Voltage Display (LM2596 with LED) – LM2596 DC-DC Buck Converter 4-40V to 1.25-37V Step-Down Regulator Power Module Volt Stabilizer with LED Voltmeter DisplaySelf-calibration, adopt LM2596S decompression chip, ou
LM2596 with LED